Are you sure?
This will redirect you to the selected website and the basket will be emptied
In StockinStock false false
Begin a new exciting new hobby with this Digital Metal Detector with LCD Screen. This metal detector can be used to find missing or lost coins, pieces of jewellery, and other metal objects. It can also be used to hunt for relics from long ago times. This is an excellent educational tool... and it is fun too!
For maximum results ensure the metal detector is calibrated as per the instruction detailed below:
• Hold the Metal Detector so that the Search Coil at the base is held up in the air away from any metal objects. • Turn the Sensitivity Knob all the way clockwise, you will hear a continuous loud beeping noise. • Then turn the Sensitivity Knob counter clockwise very slowly until the beeping stops. STOP turning the knob once the beeping stops as this position is the most sensitive detection setting. • You may need to repeat this procedure a few times to ensure the unit is at the most optimum, sensitive calibration setting. • Move the Metal Detector Search Coil close to a metalobject and you should hear a beeping tone indicating metal has been detected. You can use the Volume Adjuster knob to amend the volume to the preferred level. • Now swing the unit back and forth while keeping the Search Coil level and about 3/4 of an inch (2 cm) above the ground. • Calibration is now complete.
Batteries required (1 x 9v).
EU Warning: To be used under the direct supervision of an adult. Not suitable for children under the age of 3 years due to small parts which could cause a choking hazard.